Water Filter Reverse Osmosis Krausen Ro Direct 1600Gpd (2X800Gpd) 5-Stage + Lcd And Booster Pump

The 1600 gpd reverse osmosis unit is a high-capacity system and is the ideal solution for restaurants, ice shops, laboratories, and a wide range of commercial applications.

The unit features three 20'' pre-filters, two membranes rated at 800 gpd each, and an activated carbon post-treatment filter.

It also uses a special LCD controller that monitors all operating procedures and provides information on the filter’s operating modes. It automatically cleans the membranes at regular intervals, protects the system’s pump from continuous operation, protects the filter from potential leaks using an appropriate sensor, and provides a bar graph indicator for when the system’s pre-filters and membranes need to be replaced.

The LCD controller measures the quality of the produced purified water, and the reading is displayed in TDS (ppm).

A complete, high-quality direct-flow reverse osmosis unit that does not require the installation of a water storage tank, unlike traditional reverse osmosis systems.

Treatment stages:

20'' 5-micron sediment filter

20'' water softening filter

20'' CTO Compact Activated Carbon Prefilter

2 units (installed in series) 0.0001-micron reverse osmosis membrane with a flow rate of 800 GPD—total output of 6,000 liters per day

2'‘ x 10’' inline activated carbon post-treatment filter

Output: 6,000 liters/day.

Pure water flow: 3.6–3.9 l/min

Drain water flow: 0.9–1.2 l/min

TDS removal: 98%.

36V/2.8A pressure pump with a high-pressure switch, a low-pressure switch, and a 36V solenoid valve.

Clean water inlet and outlet via 3/8'' diameter tubing

The filter includes a glycerin pressure gauge to indicate the pressure across the membranes, as well as all necessary components for system installation (faucet with shut-off valve, water supply connector, drain adapter, wrench, connecting hoses, etc.)

System Dimensions: Height/Length/Width  84X46X31 cm

Weight: 21 kg